Design Options: (Click for larger view)

Interior Plantation Shutters can be installed on any opening. It doesn’t matter how tall, how small or how wide the opening is, we can accommodate every possible situation with our interior plantation shutters since we build each and every shutter custom just for your opening. Please review the many design options below:

Bi-fold Panels

Bi-fold panels are two panels that are hinged together and fold up adjacent to one another.

Bi-Fold Option

Click To Enlarge

Bi-pass Panels

Bi-pass panels are two or more panels mounted on an overhead track system that slide past one another.

Bi-Pass Option

Click To Enlarge

Clear View or Tilt Rod

Clear View - refers to a hidden aluminum rod along the back of the shutter that connects and coordinates the movements of the louvers. With this design, there is no need for a tilt rod. This gives the front of the shutter a clean look. The shutters can still be easily opened by rotating any individual louver.

Clear View Option

Click To Enlarge

Tilt Rod - is the center vertical bar on a panel that coordinates the movement of the louvers by connecting them to one another. When opening or closing the louvers, use the tilt rod to operate the desired location.

Tilt Rod Option

Click To Enlarge

Colors

Polycore 4 Color Options

Click To Enlarge

Lexwood 20 Paint Options	720 Custom Paint Options	20 Stain Options
Click To Enlarge	Click To Enlarge	Click To Enlarge

Divider Rail

A divider rail is sometimes placed between the top and bottom rail to add structure and integrity to the panel. The divider rail can be position at any spot desired. The divider rail also enables the louvers in the upper section to move independently from those in the lower section.

Divider Rail Option

Click To Enlarge

Door Handle Cut Out Options

French Doors occasionally come with a lever type of handle which protrudes into the glass section of the door. In these situations, the French Door shutter will need a cut out. We offer a half circle or rectangular cut out. Typically a standard 4 ¼” half circle cut out is enough to accommodate most levers, though we also offer a 5 ¼” and 6 ¼”.

Half Circle Cut Out Option	Rectangular Cut Out Option
Click To Enlarge	Click To Enlarge

Fascia

A decorative trim used to hide the track in the track system for bi-folding and bi-passing doors.

Fascia Mold

Click To Enlarge

Frames

The shutter frame is a profile used to frame the shutter panels. Frames provide a square and even mounting structure for the panels and can help compensate for an out of square opening while at the same time offering a decorative trim to the window opening.

Polycore Frame Options	Lexwood Frame Options
Click To Enlarge	Click To Enlarge

Hinge Colors

Hinges are metal mechanisms that are attached to the stile and connect the panel to the frame. Hinges enable the panel to open and close. The hinge colors that are available include Bright White, Brushed Nickel, Dull White, Off White, Antique Brass, Brass, Oil Rubbed Bronze and Stainless Steel.

Hinge Color Options

Click To Enlarge

Louver Sizes

The louvers are the panel components that rotate to offer control over the light and view.

2.5” Louvers	3.5” Louvers	4.5” Louvers	All Louvers Together
Click To Enlarge	Click To Enlarge	Click To Enlarge	Click To Enlarge

Specialty Shapes

The applications are endless and can be installed on any window (square, rectangle, arched, racked, circled or half moon) or Door (in-swing, out-swing or sliding).

Specialty Shape Options

Click To Enlarge

T-Post

The T-Post is a vertical component that is inserted into a shutter frame to separate the individual panels and also add structural support. It is required once a shutter surpasses a certain width, but it is also used at times as a decorative purpose or to cover a window mullion.

T-Post Options

Click To Enlarge